SOPTO Fiber Patch Cords
Fiber patch cords are used to connect one device to another for signal transmission. The fiber jumper is a connector that is installed at both ends for the device; only one end is equipped with a connector, which is a pigtail. Depending on the type of fiber, there are single mode jumpers and multimode jumpers. According to the structure of the connector, it can be divided into FC, SC, ST, LC, MTRJ, MPO, MU, E2000, DIN, and the like.
SOPTO Fiber Patch Cords
For more related products click the link below
https://justshop.pk/product-category/accessories/https://justshop.pk/product-category/accessories/
SOPTO Fiber Patch Cords
SOPTO Fiber Patch Cords
| Classification | Features |
|
● End-Face Type: PC/UPC/APC
● Fiber Diameter: 0.9mm, 2.0mm or 3.0mm ● Available for simplex and duplex ● The outer jacket can be PVC, LSZH, Armored etc ● Available for different connectors: SC, LC, FC, ST, MPO, MTP, MU, DIN, D4, E2K etc ● Fiber Type: Single mode fiber G652D, G657A1 and G657A2, Multimode fiber OM1, OM2, OM3 and OM4 are available ● Low insertion loss and high return loss, high dense connection, easy for operation ● Customer lengths and connectors are available upon request |
|
SOPTO Fiber Patch Cords● End face type: PC / UPC / APC ● Fiber type: SM, MM, OM1, OM2, OM3, OM4 ● Standard connector: MTP / MPO ● Low insertion loss, large return loss, stable performance ● High-precision guide pin, precise alignment to ensure its transmission performance ● Quickly configure and network to reduce on-site installation time ● A, B, C three polarity options ● Provide 12, 24, 48, 72, 96, 144 cores, or provide customized products according to customer requirements. ● Compliance with IEC 61754-7, GR-1435-CORE and ROHS standards ● Suitable for military and industrial networks ● Material characteristics: PVC, LSZH, OFNR, OFNP, Plenum ● Operating wavelength: 850nm / 1310nm / 1550nm |
|
● The CPRI patch cords are used for outdoor RRU transmitting optical signal and remote fiber feeder etc;
● Standard Duplex LC connector, well connected with standard LC adaptor ● Available Single mode and Multimode ● IP67 protection, salt-mist proof, humidity proof, dust proof ● Low insertion/return loss, steady optical transmitting. ● Light weight, waterproof, dustproof, moisture proof, Metal hard housing. ● 500cycles Mechanical life ● Widely used in FTTA, FTTH and 3G, 4G base stations |
|
● Indoor Cabling Bow-Type GJXH, GJXFH, GJXV, GJXFV optional
● Outdoor Cabling Bow-Type GJYXFCH, GJYXCH, GJYXCV, GJYXFCV optional ● UPC and APC available for the connectors ● G.652D, G.657A1, G.657A2 or MM optional ● 1/2/4 more cores are available ● Push/pull mating for quick installation ● High density and compact size ● Loss insertion loss, high return loss |
|
SOPTO Fiber Patch Cords● End-Face Type: PC/UPC/APC ● Fiber Diameter: 0.9mm, 2.0mm or 3.0mm ● Available for simplex and duplex ● The outer jacket can be PVC/LSZH/Armored etc ● Available for different connectors: SC, LC, FC, ST, MPO, MTP, MU, DIN, D4, E2K etc ● Fiber Type: Single mode fiber G652D, G657A1 and G657A2, Multimode fiber OM1, OM2, OM3 and OM4 are available SOPTO Fiber Patch Cords● Low insertion loss and high return loss, high dense connection, easy for operation ● Customer lengths and connectors are available upon request |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Networking Products, Wireless
AC750 Wi-Fi Router DIR-806A
- AC750 Wi-Fi Router DIR-806A
- Simultaneous operation in 5GHz band and 2.4GHz band, 802.11a/b/g/n/ac compatible
- Total wireless connection rate up to 750Mbps
- 10/100BASE-TX WAN port
- 4 10/100BASE-TX LAN ports
- Two external non-detachable antennas (5dBi gain for 2.4GHz and 5GHz)
- One internal antenna (3dBi gain for 2.4GHz)
- IPv6 ready
- Support for wireless encryption using WPA™ or WPA2™
SKU: n/a -
Networking Products, Routers, Wireless
Wireless N300 Router DIR-612
- Set up in minutes with the D-Link setup wizard
- IEEE 802.11n/g technology
- Supports wireless encryption using WPA™ or WPA2™
- Fast Ethernet ports (WAN/LAN) to share high-speed Internet access with computers and game
- High-gain antennas to enhance Wi-Fi coverage around your home
- Supports Wi-Fi Protected Setup (WPS)
SKU: n/a -
Networking Products, Switches
Extreme Networks K-Series K10 Chassis USED
The Extreme Networks K-Series™ is the most cost-effective, flow-based switching solution in the industry. Providing exceptional levels of automation, visibility and control from the network edge to the small enterprise core, these flexible, modular switches significantly reduce operational costs while still offering premium features.
SKU: n/a -
Networking Products, Switches
48 Port POE Switch
Benefits:
Business Alignment
- Aligns network resource utilization with business goals and priorities
- Reliable network operation for missioncritical applications
Operational Efficiency
- Management automation capabilities reduce network operational expenses
- Automatic discovery and deployment of VoIP services
Security
- Ability to audit network for adherence to compliance regulations, such as PCI or HIPAA
- Network resources securely allocated according to user roles
- Network security maintained concurrently with user mobility
Support and Service
- Industry-leading customer satisfaction and first call resolution rates
- Personalized services, including site surveys, network design, installation, and training
- Comprehensive lifetime warranty, including feature upgrades and more
SKU: n/a
There are no reviews yet.